Over at Moxie Fab World until midnight EDT on the 9th there is a challenge to use something non paper that you would probably throw out. Well I had these scraps of ribbon trimmed lace and I'm thinking they are so short I'll just toss them. Plus they are stained on the ends. (They were in a bag of assorted lace and ribbon I bought at a thrift shop.) So unless I was going to glue them under they would be even shorter. Then my mind got to working on how I could use these scraps of lace. I also wanted a way to give someone a necklace in an unusual way. Here is my card.
I found the Avon pendant at a bead shop for $1 and knew I wanted to turn it into a necklace for someone special. I have been looking for months now for the perfect chain and found this chain with beads. I love how they go with the pendant.
I cut a square out of card stock and ironed a piece of scrap heat bond on it. Then I took the backing off the heat bond and ironed my lace pieces on top after I had placed them where I wanted them. Glued the edges where the lace was stained underneath the panel. You could also do this with pieces of ribbon,scraps of fabric,or even yarn.
I took the scalloped label in the Studio library and made it the size I wanted. Then I snipped on both ends of the top so that the chain would have a place to hang. I heat embossed the scallop panel with glitter gold embossing powder. I did some thinking and decided to cut a square and glued it on three sides as a pocket on the back of the scallop piece to hold the chain so that it would not hang below the card. I then attached my lace piece onto the front of the scallop piece. I decided to attach velcro buttons to the back of the panel. I found the easiest way is to have both pieces velcroed together when I go to attach to the panel and then card. I figured by having the panel velcroed it would be easier for the person getting the card to store the necklace back on the card if they wished. Since they could take the panel off and put the necklace on it and then velcro the panel back on the card.
There you have it a couple of pieces of lace saved from the garbage and I think a very unique card. As well as an inexpensive card to make since the square and scallop were cut from scrap card stock left over from a print and cut. The necklace cost me a total of $3 to make with left over bead chain for other projects.
Here is the Moxie Fab World link. Even if you don't have time to submit something check out what others have done for inspiration. There are lots of really fabulous entries for this challenge.
http://www.moxiefabworld.com/2012/03/practical-solutions-for-paper-crafters_22.html
Thank you for stopping by. Do come back as you never know what I might have up my sleeve next.
Happy Crafting!
Sunday, April 8, 2012
Friday, April 6, 2012
Embellishment My Way
If you have been following my blog or belong to the Silhouette Plus Forum you know that I am a frugal crafter. I hate to spend money on things I can make myself unless it is something which is on sale and a darn good price. So when I heard that Moxie Fab World had a DIY Embellishment challenge I knew that was for me.
Except for the rhinestones everything is cut out of card stock using my Cameo. The background was a free file. I don't know if Scalloped border came with my Cameo or whether it was a free shape. I cut it out and heat embossed it. I like the delicate metal look. The flower is just called flower in the Studio library. I un-grouped and got rid of the circle which was in the middle. I heat embossed with my own concoction of Kaleidoscope,Eggplant Pearl and Purple. The picture doesn't really do the color justice. I shaped the petals by hand. The center is a file simply called embellishment. I heat embossed it and added the rhinestones. I thought of coloring the rhinestones but decided to leave them clear. The flower is pop dotted on.
There is still time if you wish to play along. You can find the details here: http://www.moxiefabworld.com/2012/03/practical-solutions-week-diy.html
I definitely will be using the embellishment file more. I'm thinking that it could be glued on brads for an embellishment. I like the fact that I can make it whatever size I want. I'm not limited to what size it might come in at a store. Also I can make it whatever color I want. Don't be surprised if you see more heat embossed cut out mats in the future. I really love that look.
Thank you for stopping by. I hope I have inspired you to make your own embellishments whether with a cutting machine,dies,or punches.
Happy crafting until next time.
Except for the rhinestones everything is cut out of card stock using my Cameo. The background was a free file. I don't know if Scalloped border came with my Cameo or whether it was a free shape. I cut it out and heat embossed it. I like the delicate metal look. The flower is just called flower in the Studio library. I un-grouped and got rid of the circle which was in the middle. I heat embossed with my own concoction of Kaleidoscope,Eggplant Pearl and Purple. The picture doesn't really do the color justice. I shaped the petals by hand. The center is a file simply called embellishment. I heat embossed it and added the rhinestones. I thought of coloring the rhinestones but decided to leave them clear. The flower is pop dotted on.
There is still time if you wish to play along. You can find the details here: http://www.moxiefabworld.com/2012/03/practical-solutions-week-diy.html
I definitely will be using the embellishment file more. I'm thinking that it could be glued on brads for an embellishment. I like the fact that I can make it whatever size I want. I'm not limited to what size it might come in at a store. Also I can make it whatever color I want. Don't be surprised if you see more heat embossed cut out mats in the future. I really love that look.
Thank you for stopping by. I hope I have inspired you to make your own embellishments whether with a cutting machine,dies,or punches.
Happy crafting until next time.
Sunday, April 1, 2012
Scrappy Note Card
Right now over at Moxie Fab there is a paper scrap challenge using scrap paper in a project. I thought it was time for me to do this challenge. Especially since my scrap pieces of card stock and papers are beginning to take over every available surface and drawers in my crafting area.
Not only that but I have all of these old bills and other mail which needs shredded and so I started salvaging some of the envelopes to use in crafting. The envelopes are lined with interesting paper which could be inked,chalked,stamped on,etc. or left just as is. If you are going to cut this paper with a Silhouette cutter you will want to use print paper medium for the cutting setting.
Here is the note card I came up with.
I cut into a rectangle a scrap of card stock left over from cutting out shapes. I decided to use the negative from the butterfly I cut out for the card in the previous post.The narrow edge left from cutting out shapes I used my border punch on to make a narrow piece to fill in at the top. I cut a left over shape which was the inside of a frame so it looks like a partial sun as the oval was too large. I had attempted to do a resist emboss on the front of a card but did not like how the inks worked on it so cut a couple of rectangles from it to use on this card. The unused other side of the card is the base. Did I mention that I'm a frugal crafter. LOL!
Since the pink was plain I embossed it with a border embossing folder. The left over shape I heat embossed and then inked as it was too stark as white.
Once I had my pieces arranged on the base the way I liked them it was time to have fun.*At this point I take a picture so I know how to place them after the base is either sprayed with adhesive or run through an adhesive machine.*
If you decide to do this you will want to leave spaces in between your pieces because you will be doing heat embossing. That is the reason for either using adhesive spray or running the base through an adhesive machine. Depending on the embossing powder you use the base may not show. This would be a great way to use for a base perhaps a color you are not all that fond of. Keep in mind if you are using cut outs they will be heat embossed.
I wish I would have had silver embossing powder but only had gold or Bronze embossing enamel which will also work for this. I figured the eggplant pearl embossing powder would have been too much purple.
The butterflies were cut out of envelopes. Then ink rubbed on and glitter applied. Scrap Floss was used for the antenna for the negative butterfly and the cutout ones.
I love how nice this scrappy note card came together that I can't wait to make more of them to give as a gift. Oh and by the way this same technique can be used using paint samples,wall paper samples,or even photos that were bad if like me you have a bunch from the BDC days. (before digital camera)
I hope I have inspired you to use those scraps. Also I hope I have inspired you to try this technique. Oh and please go and salvage envelopes to use in your crafting. The less we put in landfills the happier our earth will be. Besides that using them is a frugal way to craft. Oh and here is the link to enter the Paper Scraps Challenge http://www.moxiefabworld.com/2012/03/practical-solutions-for-paper-crafters.html
Thank you for stopping by and do come again. You never know what creative thing may be next. Have fun crafting!
Not only that but I have all of these old bills and other mail which needs shredded and so I started salvaging some of the envelopes to use in crafting. The envelopes are lined with interesting paper which could be inked,chalked,stamped on,etc. or left just as is. If you are going to cut this paper with a Silhouette cutter you will want to use print paper medium for the cutting setting.
Here is the note card I came up with.
I cut into a rectangle a scrap of card stock left over from cutting out shapes. I decided to use the negative from the butterfly I cut out for the card in the previous post.The narrow edge left from cutting out shapes I used my border punch on to make a narrow piece to fill in at the top. I cut a left over shape which was the inside of a frame so it looks like a partial sun as the oval was too large. I had attempted to do a resist emboss on the front of a card but did not like how the inks worked on it so cut a couple of rectangles from it to use on this card. The unused other side of the card is the base. Did I mention that I'm a frugal crafter. LOL!
Since the pink was plain I embossed it with a border embossing folder. The left over shape I heat embossed and then inked as it was too stark as white.
Once I had my pieces arranged on the base the way I liked them it was time to have fun.*At this point I take a picture so I know how to place them after the base is either sprayed with adhesive or run through an adhesive machine.*
If you decide to do this you will want to leave spaces in between your pieces because you will be doing heat embossing. That is the reason for either using adhesive spray or running the base through an adhesive machine. Depending on the embossing powder you use the base may not show. This would be a great way to use for a base perhaps a color you are not all that fond of. Keep in mind if you are using cut outs they will be heat embossed.
I wish I would have had silver embossing powder but only had gold or Bronze embossing enamel which will also work for this. I figured the eggplant pearl embossing powder would have been too much purple.
The butterflies were cut out of envelopes. Then ink rubbed on and glitter applied. Scrap Floss was used for the antenna for the negative butterfly and the cutout ones.
I love how nice this scrappy note card came together that I can't wait to make more of them to give as a gift. Oh and by the way this same technique can be used using paint samples,wall paper samples,or even photos that were bad if like me you have a bunch from the BDC days. (before digital camera)
I hope I have inspired you to use those scraps. Also I hope I have inspired you to try this technique. Oh and please go and salvage envelopes to use in your crafting. The less we put in landfills the happier our earth will be. Besides that using them is a frugal way to craft. Oh and here is the link to enter the Paper Scraps Challenge http://www.moxiefabworld.com/2012/03/practical-solutions-for-paper-crafters.html
Thank you for stopping by and do come again. You never know what creative thing may be next. Have fun crafting!
Subscribe to:
Posts (Atom)